MAINBOARD ECS P4VMM2 DRIVER

This publication, including all photographs, illustrations and software, is protected un-. Got it, continue to print. Some features on the mainboard are implemented by cabling connectors on the mainboard to indicators and switches on the system case. Additionally, some computer cases have USB ports at the front of the case. Checking Jumper Settings Checking Jumper Settings The following illustration shows the location of the mainboard jumpers. Do not overtighten the screws as this can stress the main- board. In this manual, default values are enclosed in parenthesis.

Uploader: Tosar
Date Added: 17 April 2008
File Size: 27.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 71605
Price: Free* [*Free Regsitration Required]

Check the box next to the items you want to install. The following screen appears: Apply thermal grease on top of the CPU. Page 35 Password Check If you have entered a password for the system, use this item to determine, if the password is required to enter the Setup Utility Setup or required both at start-up and to enter the Setup Utility Always.

The default options are recommended. Position the backplate against the underside of the mainboard, secure the 4 screws firmly on the retention module.

ECS P4VMM2 – motherboard – micro ATX – Socket – P4MA Overview – CNET

The mainboard com- plies with the specifications for the Micro-ATX system case. Additionally, some computer cases have USB ports at the front of the case.

  ASUS P8H77 V DRIVER

maibboard

Follow these instructions to install an add-on card: The floppy diskette drive cable has one type of connector for a 5. Remove a blanking plate from the system case corresponding to the slot you are going to use.

Put the CPU Fan down on the retention module and snap the four reten- tion legs of the cooling fan into place. Comments to this Manuals Your Name. The mainboard identification is located in the upper left-hand corner. DOC file in the root directory.

To print the manual completely, please, download it. Installing the Processor Caution: In this manual, default values are enclosed in parenthesis.

ECS P4VMM2 Motherboard With Intel Pentium 4 GHz and 1 GB Memory RAM | eBay

You set this value to No to free up an IRQ. Installing A Floppy Diskette Drive Installing a Floppy Diskette Drive The mainboard has a floppy diskette drive FDD interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives.

The following screens are examples only.

Preface Copyright This publication, including all photographs, illustrations and software, is protected un- der international copyright laws, with all rights reserved. OnBoard IR Port Use this item to enable or disable the onboard infrared port, and to assign a port address.

  BLITZZ USB ADAPTER DRIVER DOWNLOAD

ECS P4VMM2 – 5.0A – motherboard – micro ATX – Socket 478 – P4M266A

These limits are designed to provide. A different pin assignment may cause damage or system hang-up. Operation is subject to the follow- ing conditions: Neither this manual, nor any. Below you can find a brief description of each software program, and the location for your mainboard version.

Other product names used in this manual are the properties of their respective owners. Page 7 Expansion The mainboard comes with the following expansion options: Change Password If you highlight this item and press Enter, a dialog box appears that you can enter a Supervisor password. Locate the CPU cut edge the corner with the pinhole noticeably miss- ing.

ECS P4VMM2 Motherboard With Intel Pentium 4 2.4 GHz and 1 GB Memory RAM

After the POST routines are completed, the following message appears: Page 20 Locate the CPU cut edge the corner with the pinhole noticeably miss- ing. Press the lever down. The information in this document is subject to change without notice.